|
Classifieds
Listings are free. NO EBAY AUCTIONS ALLOWED!
Listed in order of submission. Items will be listed for 30 days and then
removed. Please include e-mail address and location in your description!
Classified ads are between two private parties. Winged Messenger is in no
way responsible for any transactions!
Submit your ad here!
|
December 21, 2009
willjohnston@rocketmail.com
|
1965 Mercury M100 truck for sale….
This is a project that was started years ago and has
been abandoned. The cab has had the roof chopped 4”. The truck is
disassembled right now but is mostly complete. The fenders, hood, doors, and
rad support are all stored indoors. There is no glass for the cab but it
does have the original 352 with automatic
transmission in it. The front suspension has been changed to Dodge torsion
bar and the matching rear end is here just not installed. The
tailgate is still on the truck and the grille piece with the Mercury letters
is still here as well. There is a title with the truck….Most of the big
work to make this a nice custom cruiser is done. It will need some good
welding skills and body work to make it complete again.
Asking $1200 or best offer.
May consider trades
Call (905)
701-6274 or email willjohnston@rocketmail.com
Try your offers, the worst I can do is say no. I would
like to see this go to someone who will use it for parts to finish theirs or
finish this one. Would like to see it gone ASAP.
Thanks for looking.
|
|
FOR SALE
November 20, 2009
drkchlde@yahoo.com
|
1971
Ford Torino 351ci This is a 1971 Ford Torino two door hardtop coupe. It has a
351 Windsor engine with Ford Cobra racing valve covers and air cleaner. It has
a 3 speed automatic transmission, shifter on the column. True dual exhaust
with chrome tips. The paint is Grabber Blue and is in decent condition. The
paint on the hood is lifting in spots. I don’t believe it was prepped
properly when last painted. I was going to spray it gloss black, and will do
so for the new owner at no extra cost if desired. I added power steering to
the car last winter using original Ford parts. I also added an original Cobra
front sway bar. The interior is very nice, probably was redone at some point.
The seats are black vinyl, and the dash pad is covered in black leather. The
carpet looks new, and there are Ford Motorsport rubber mats on the floor. The
door panels are the only parts that show any wear. The trunk is immaculate,
and the spare and jack look great. There is NO RUST on the car, but there is a
small bubbling area on the passenger door, not through the paint. The car runs
great and is fairly quick for a small block. It has an 8 inch open rear end
and I do not know the gearing. The radio is an aftermarket piece, but the dash
has not been cut so it can be put back to original. There are added gauges for
tachometer, vacuum gauge, oil pressure, temperature, etc. Wheels are stock
Ford rims with chrome or stainless trim rings and hub caps. The tires are like
new. The grille and headlight surrounds are Cobra pieces, and the rear
taillights are GT style. I have many spare parts, some NOS pieces. A full set
of 1971 Ford shop manuals will be included. I’ve owned the car for two years
and barely drive it, and that’s why I’m selling it. I will answer any
questions. Some partial trades considered. $6250 or best offer. Constantia, NY 13044
|
|
FOR SALE
November 20, 2009
drkchlde@yahoo.com
|
1983
AMC Jeep CJ-7 258ci 4 spd This is an original 1983 AMC Jeep CJ-7 with 258ci
inline six cylinder engine and 4 speed transmission. It has the Dana 300
transfer case, Dana 30 front axle, and Dana 20 rear axle. I believe everything
on this Jeep is original except for the new aluminum valve cover and the
Summit electronic ignition module I just put on. The hard top is in very good
condition, and there is NO RUST on the lift gate. The four wheel drive works
properly, shifting into 4 LO and 4 HI with no problems. The four speed
transmission works fine, and the engine runs strong. The frame is solid with
only one small rust spot by the rear bumper cross member. The tires are
Goodyear Wranglers 235/75/15 on the original “wagon wheels.” The interior
is in decent shape, but the driver’s seat needs to be recovered. It is all
black vinyl. I have a lot of spare parts that can go with the Jeep to the new
owner. I have two sets of hard doors. The original hard doors need some
patching around the window frame, and another set of older style doors that
work fine but don’t match in color. The Jeep runs and drives fine, and is
currently inspected. I need to finish my Cobra project, so this has to go to
make room. $3200 FIRM. Constantia, NY 13044
|
|
FOR SALE
November 13, 2009
pontdog@nb.sympatico.ca
|
1957 Monarch Lucerne i bought this car from the original owners who
drove it until '72.this car was built in Canada
and only 1484 were made. it
has only 26000 original miles. the motor is stuck and the body does have
issues but it is very solid. the interior has no tares or rips in
headliner or seats. plastic still on seats. i have documents also. driver
side rocker needs replacement also headlight eyebrows. i have all of these.
i can be contacted at pontdog@nb.sympatico.ca i
have plenty of pics. this car is located in Dieppe N.B. Canada the asking
price is $12,000.
|
|
WANTED
August 25, 2009
99octane@earthlink.net
|
WANTED: 1968-1969
Mercury Montego front fender edge "Eyebrow"
/ Headlight opening moldings and hood opening molding. Prefer NOS but can
deal with excellent cond. used. Orig. posted August 2009
|
|
FOR SALE
August 4, 2009
matt@hamilton-inc.com
|
1966 and 67
Mercury Comet parts for Sale
Send want list to
matt@hamilton-inc.com.
We are located in Central California and have everything
from
Sheet Metal, Glass, Interior and Exterior Trim, Grills, Radios, Dash
Pad, Dash pieces,
Steering Wheels. Parts are mostly for the
Caliente or Cyclone but some 202 and Sedan parts available.
|
|
FOR SALE
May 26, 2009
ronaldj1020@sbcglobal.net
|
I have a 1970 mercury cyclone gt. The car has a rebuilt 351c
less than a houndred miles,c6 tranny. car runs and is tag till 2010.There is no
rust on the car, Body is prime rust color, took the lights off to paint (never
got to that) I have all the parts to the car. Will sell this car for $4900.00 or
bo. The car is in N.CALIF. Call Ron at
510-388-1440 |
|
FOR SALE
May 18, 2009
Cornerstonemgnt@aol.com
|
1968
Mercury Montego for sale. Rare original car. Very low original mileage
(under 50,000). 2 Door with a 390 FE, 4 speed and
front bench seat (very rare
option). Car runs very well but needs a new clutch. Also needs a new headlamp
footswitch. Body is solid with some surface rust (no holes or serious rust
issues). Please email me at
Cornerstonemgnt@aol.com for more information. Thank you, PJ |
|
FOR SALE
May 4, 2009
uknowantknee@hotmail.com
|
For sale is a complete 1966 Mercury Parklane Breezeway Sedan - $2700 - Located
in St. Louis, MO
The pearl white and red interior of this car is in really nice shape and goes
great with the red and white exterior. I have all the trim pieces (a couple
are off the car), a new
tail light (one is cracked) and used bumpers with good chrome that go
with the car.
The car is complete but currently not running. It developed a back of
block engine oil leak (I
believe rear main but haven't gone through the trouble to check) and has been
garage parked for the past 7-8 years. I recently had to move it out of the
garage to make way for another project.
It has the factory 410 FE engine. It has good compression, being rebuilt less
than 5,000 thousand miles before being parked. The crank is a 428 1UA crank.
It has the lightening bolt pent roof valve covers. The heads were rebuilt with
hardened seats to run
unleaded fuel. The transmission is a C6 with overdrive that was also
rebuilt at the same time as the engine. Tires are really nice too.
The car has a few rust spots and the hood corners by the cowl are damaged from
flying open years ago.
Car came equipped with power steering, power brakes and AC. With a little time
and effort, you could have a very cool summer cruiser. Trust me, it gets a lot
of attention on the streets. It was my daily driver for years. It's a really,
really fun car. I just have too many projects and don't have the time or room
for it.
I can email pics on request.
Anthony
|
|
WANTED
May 4, 2009
grant7474@yahoo.com
|
NEED
ROCKER MOULDINGS PART NUMBER
C7MY-5410176-A QTY 2
AND C7MY-8A156A
FOR 1967
MERCURY MONTEREY CONV.
|
|
WANTED
May 4, 2009
lmh@westriv.com
|
Hi out there!
I have an 85 Merc Marquis that I purchased
a couple of years ago in excellent condition. However, last year, the
headliner started loosening through the center from front to rear. What are
my options-I can't seem to locate any headliners for that year/model and no
one locally has any answers for me either-HELP!!!!
Lorretta
|
|
WANTED
March 9, 2009
ranmarr33@yahoo.ca
|
Wanted: 1969 Cyclone.Front nose or any fenders
from a 1969 Mercury Cyclone Spoiler ll .
Dan Gurney or
Cale Yarborough edition.
Or if anyone can supply templates and measurements for front fenders. And for
the front neader panel and
front bumper. Greatly appreciated. Call Randy at
1-403-877-5985, or
403-347-1937 or email:
ranmarr33@yahoo.ca
|
|
FOR SALE
January 13, 2009
|
1970 MERCURY CYCLONE GT FOR SALE!
Original 351c in it. This baby is 100% rust free. I have pics with the
carpet and interior out to prove it... interior was redone and is now in the
car. complete and looking good. email me for pics if interested. Asking 10k mailto:na@bottledbolts.com
Still have the blue and yellow CA plates... Car located in Southern CA.
|
 |
